| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 20000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | STT-288-12 | STT-640-12 | STT-1200-12 | STT-2288-12 |
| Chamber Size mm (W*D*H) | 600x800x600 | 800x1000x800 | 1000x1200x1000 | 1300x1600x1100 |
| Power supply | 380V/30KW | 380V/70KW | 380V/120KW | 380V/180KW |
| Type | Car bottom Bogie furnace | |||
| Usage | General purpose furnace ideal for general laboratory uses-gravimetric analysis, sintering, quantitative analysis and heat treatment | |||
| Furnace structure | 1. Furnace Chamber consists of furnace material, thermal insulation material and heating elements. 2. Temperature control system consists of temperature control instruments, control elements and thermocouples. 3. Furnace body and temperature control center designed in separate structure. Furnace electrical lifting opening and closing is very labor-saving and fast. 4. The trolley is designed in a rectangular shape with a size of 1600mm×1300mm. The electric drive of the trolley advances and retreats, and the limit switch is designed to automatically stop. The trolley access button is integrated on the temperature control cabinet panel. 5. There is a burning board on the trolley. The material of the burning board is silicon carbide ceramic, and the temperature-resistance is 1400 °C. |
|||
| Max. temperature | 1200ºC | |||
| Continuous working temperature | 1100ºC | |||
| Heating Rate | ≤15ºC/min (suggest 10ºC/min for longer life using of furnace) | |||
| Heating Element | It use high temperature alloy resistance wire as heating element, wearing on the cermaic tubes, continuous service life of 8000 hours. | |||
| Chamber material | 1. Furnace Lining: Furnace material is 1400ºC high-purity Light Mullite bricks, high temperature without powder dropping, good thermal shock performance and thermal stability, low heat capacity, low thermal conductivity, energy saving more than 50%. 2. Thermal Insulation Material: The furnace is insulated by polycrystalline alumina ceramic fibers with temperature resistance of 1260ºC |
|||
| Temp. Uniformity | ±10°C | |||
| Thermocouple | N type, two testing points, testing from its back wall | |||
| Temperature Controller | 1. Japan SHIMADEN intelligent microcomputer PID temperature control instrument, 2. Germany SEMIKRON SCR controller thyristor phase shift voltage control, PID parameter self-tuning function, over temperature alarm and break alarm function; programmable 30 time slots, automatic temperature rise, automatic heat preservation, automatic stop, can meet the requirements of continuous constant temperature and temperature control; 3. SCR thyristor phase shift trigger voltage control method, heating temperature fluctuations are small, temperature stability is high. When the sudden load or load current exceeds the current limit value, limit the output current of the voltage regulator within the rated current range to ensure the output and regulator work properly. 4. The voltage loop participates in the regulation, the output current of the voltage regulator is limited to the rated current range, and the output current and voltage are kept constant; 5. the protection of the heating element avoids the impact of excessive current and voltage, and achieves safe and reliable control effect and control precision. 6. Temperature controller Accuracy: ±1ºC 7. Electronic Components: AC contactor, indicator lamp, knob switch, buzzer and other components choose Japan Shimaden or the same level of brand production, to ensure long-term stability and reliability. 8. Temperature Control Cabinet: Optional Independent Temperature Control Cabinet. 9. Two heating zones for temperature controling and two temperature-controlled thermocouples, each of which can work independently |
|||
| Electronic component | SCHNEIDER maker air switch, buttons, solid-state relay, A.C contactor etc. | |||
| Furnace Shell | 1. High quality cold-rolled steel sheets CNC processing 2. Environmental electrostatic plastic-spraying on surface after deoiling, derusting, phosphating etc. nine processes 3. Energy efficient insulation keeps exterior safe to touch |
|||
| Hydraulic system | This equipment is provided with 1 hydraulic cylinder for lifting and 4 hydraulic cylinders for opening and closing of furnace door. And the hydraulic system is mainly for these hydraulic cylinders to provide power | |||
| Trolley system | It is composed of trolley shell, lining plate, furnace bottom plate, trolley mechanism, etc. Mainly used to place the workpieces and the operation of carry in and carry out | |||
| Safety Precautions | 1 Modular control, which can send out sound and light alarm signals when over-temperature and breakage occur in the working process, and automatically complete the protection movement; 2 Equipped with an open circuit breaker on the equipment, it will pop up automatically in case of short circuit leakage, which can protect the equipment and safety of operating staff. |
|||
| Supply Scope |
1. Industrial Hardening Furnace Body with heating elements |
|||
| Optional Accessories | 1. Extra heating elements 2. Alumina crucibles |
|||
| Certification | ISO9001; CE; SGS | |||
| Warranty |
1. One year of equipment quality guarantee (excluding vulnerable parts: resistance wire, thermocouple, etc.). |
|||
Standard Export Safe Packing:
1.The furnace body was warped with enrivonmental plastic stretch film, then fixed well on the steel palet
2.Tailored polywood case, coupled perfectly with the pallet
3.Filled with polyfoam, fit well between the furnace body and the case in all sides
4.Easy-to-identify double-sided outer box print logos and shippment marks
Delivery Time: 80 working days against receiving advanced payment
Port: Shanghai/Qingdao
Henan Sante Furnace Technology Co., Ltd. is a high-tech enterprise located in Luoyang area of Henan, China Free Trade Zone. SANTE products cover 1000ºC~1800ºC Muffle furnace, Tube furnace, Vacuum furnace, High Temperature Furnace, 2000ºC Ultra-High Temperature Furnace, Dental furnace, Industrial chamber furnace, elevator furnace, Intelligent mobile car bottom furnace, Smelting furnace and so on
Our goal is to continuously meet the various demands for various kinds of high temperature heating treatment lab furnaces and to be the world first-class enterprise with providing excellent service and high-quality products for our cooperation partners!
Yes. We are China leading laboratory and industrial heating treatment furnace manufacturer, which integrates design, manufacture and sales for nearly 20 years.
2: Do you have customization or OEM service?
We can customize furnaces as product, work piece size, and temperature requirement. Meanwhile, we offer OEM service under the strict industrial standard.
3: What is the delivery time?
Normally within 80 working days after receiving the advanced payment or depends on order quantity.
4: How can you guarantee the production quality?
Firstly, we are ISO9001:2008 and CE certified factory, all the processes are strictly following the standard of the metallurgy process; secondly. We have QC department who perform strictly in each producing process including package.
5: How long is your furnace warranty period?
One year(expect thermocouple and heating element), lifetime support
6: What payment terms does SAFTHERM support?
T/T, L/C and so on.
Marketing Manager: Caleb Li
https://santefurnace.en.made-in-china.com
Add: No.4, Sunxin Road, Luoyang Free Trade Zone, Henan, China
){kind=link}