| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 3 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. The 1700 tube furnace for lab material is high-purity alumina ceramic fiber materials, new assembly structure, no transformation in long term high temperature, sturdy and durable
2. The heating element is made of high-quality molybdunum disilicon rod, which can bear large load, stable and long service life
3. The tube furnace for lab adopts alumina tube as carrier and the stainless steel flanges on its both ends are simple design, reasonable, easy to disassemble and convenient for entering and leaving sintered samples
4. The heating rate is fast, from room temperature to 1700 degrees, generally takes 170 minutes
5. Using digital intelligent PID temperature control instrument, with program function, can set the temperature rise curve, can be programmed 30 segments
6. Electronic components are used products, with leakage protection, safe and reliable
7. The 1700 annealing tube furnace for lab will send out an alarm signal to the over-temperature during the working process, and automatically complete the protection action.
8. When the instrument program is set, just press the run button and the next work will be completed automatically
9. It can be installed with a gas mass flowmeter, digital precise control of the gas.
| Model | STG-40-17 | STG-60-17 | STG-80-17 | STG-100-17 |
| Quartz tube Size | OD40x800mm | OD60x800mm | OD80x800mm | OD100x800mm |
| Heating length | 300mm | 300mm | 300mm | 300mm |
| Power supply | 220V/3KW | 220V/4KW | 220V/5KW | 380V/5KW |
| Furnace Type |
Horizontal, single heating zone tube furnace |
|||
| Usage |
The product is suitable for elemental analysis, measurement and steel hardening, annealing, tempering, heat treatment and heating in laboratory, industrial and mining enterprises, scientific research units,can also be used for sintering of metal, stone, ceramic, dissolution analysis of high-temperature heating. |
|||
|
Reactor |
1.Reactor size: OD100xL900mm (ID 92mm) |
|||
|
Vacuum performance |
Designed with an air outlet on the furnace tube, which make it available for extracting vacuum by a vacuum pump. Vacuum pressure range 10-100Kpa (ambient air) |
|||
| Max. Temperature | 1700ºC | |||
| Continuous Temperature | 1400ºC | |||
| Heating Rate | ≤10ºC/min (suggest 10ºC/min for longer life using of furnace) | |||
|
Temp. Homogeneity |
Adopt the way of measuring temperature at 9-point
Temperature homogeneity is +/-5 degree |
|||
|
Power Supply |
AC220V; 6KW
50Hz, single phase |
|||
| Heating Element |
1. MoSi2rods as heating elements |
|||
| Chamber material | 1. Adopt high quality alumina polycrystalline fiber, which used Japanese technology (vac-sorb forming alumina polycrystalline fiber) with good insulation and durability properties 2. High quality 1800 degree fiber alumina as refractory lining, pure white color 3. Ceramic fiber insulation for fast heat-up and reduced energy consumption |
|||
| Thermocouple | B type | |||
| Temperature Controller |
1. Digital PID with 4 programs and 32 segments 2. Simultaneous LED display of actual temperature VS set point 3. PID automatic control and auto-tune function 4. +/- 1 ºC temperature accuracy Control system integrated in furnace base, defined application within the constraints of the operating instructions |
|||
| Alunima tube |
1. High purity round single bore alumina process tubes for high temperature tube furnaces, open one or both ends. |
|||
| Vacuum flange | one pair of SS304 vacuum sealing flanges with inlet and outlet ports, which is available | |||
| Electronic component | air switch, buttons, solid-state relay, A.C contactor etc. | |||
| Furnace Shell | 1. High quality cold-rolled steel sheets CNC processing 2. Environmental electrostatic plastic-spraying on surface after deoiling, derusting, phosphating etc. nine processes 3. Energy efficient insulation keeps exterior safe to touch |
|||
| Safety Precautions | 1. Overheating & Broken thermocouple protection 2. Leakage circuit breaker 3. Automatic power off when furnace door opens (optional function) 4. Over-temperature protection and alarm allow for operation without attendant(s) 5. Microprocessor-based PID control with self-tuning capability to prevent overshooting of set temperature |
|||
| Certification | ISO9001 CE SGS | |||
| Warranty | One year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products respectively | |||
Marketing Manager: Caleb Li
https://santefurnace.en.made-in-china.com
Add: No.4, Sunxin Road, Luoyang Free Trade Zone, Henan, China
){kind=link}